The next generation of photometers – the PrimeLab 2.0,

 

developed by Water-i.d.®

High-precision readings due to 18 different wavelengths,

WiFi–USB–Bluetooth®–GSM** connection, powerful software

and app, synchronised via a free cloud service, large

HD touch display and the possibility to connect electrodes

are just some of the features of the new PrimeLab 2.0,

which replaces the proven PrimeLab 1.0.

While conventional photometers only perform tests at

selected wavelengths, the Primelab 2.0 can also receive

data from different wavelengths in parallel and thus covers

the most important parts of the UV and IR range as

well as the entire VIS range. Corresponding LEDs are positioned

at both 180° and 90° to also allow NTU turbidity,

PTSA and fluorescein measurements. Very narrow peaks

between 390 and 950 nm enable the most accurate readings,

close to the performance of a spectrophotometer.

 

The highly professional PrimeLab 2.0 firmware interpolates

between the different wavelengths, while some

parameter curves are set to use multiple wavelengths to

obtain the most accurate test results. For each method,

there are step-by-step instructions in many different languages

as well as useful animations shown on the Prime-

Lab 2.0 screen and links to user videos to ensure that the

correct and proper procedure is followed. Like the Prime-Lab 1.0,

the PrimeLab 2.0 offers a flexible parameter setup

with all the options to upgrade as needed. The PrimeLab 2.0

offers more than 140 different parameters/methods, covering

the needs of many different industries. With its built-in

camera, the PrimeLab 2.0 will offer the ability to scan QRcodes

to identify sampling points set up by the user and to

identify reagents with the QR-code on the packaging.

 

Advantages of these options are:

- Scanning the QR-code of a sampling site ensures that you

always link the test results you receive to the correct sampling

point. This shortens the testing process as the associated

sampling point is automatically selected.

- Scanning QR-codes on reagent packaging prevents the

wrong or even expired reagents from being used and

speeds up the testing process by pre-selecting the parameter/

method.

 

In addition, the PrimeLab 2.0 is the ultimate in connectivity!

With WiFi–USB–GSM**(via USB modem) there are several

ways to connect the PrimeLab 2.0 to a smartphone, tablet,

computer or directly to the LabCOM® cloud.